Load Securement Practice Test

These questions are part of the practice quiz. Start practicing

• What is the primary function of X-straps in load securement?
• Which securement devices are used at the front and rear of palletized loads?
• If you are unsure how to secure a load, what should you do?
• What applies to double shotgun coiled rod?
• How accurate are air gauges for weight readings?
• What does the term working load limit (WLL) refer to?
• What should you avoid when securing wallboard or insulation?
• For tin plate coils secured with chains, which edge protectors should be used?
• What is the minimum number of straps required per complete stack of ductile (Griffin) pipe?
• True or False: Padding tarps are necessary for greasy bars.
• In the context of fall zones, what is a consideration for securement on uneven surfaces?
• When is it OK to jump off a trailer?
• Why is it crucial to maintain an organized cargo placement?
• At what angle should tie-downs be positioned to maximize holding power?
• What can be a safety issue in fall zone 1 aside from moving machinery?
• When should you visually assess the load after securing it?
• Which factor can contribute to hazards in fall zone 3?
• Why is it important to pay attention to the cargo during the securing/unsecuring process?
• True or False: If you build a bulkhead, you never have to use a shipper's bulkhead.
• What hazard may occur due to inattention in fall zone 3?
• True or False: Padding tarps are not required for coiled rod that needs to be tarped.
• What safety concern is associated with cargo shifting during transport?
• Is it acceptable to lean over the cheater bar for better weight application?
• Which of the following is NOT a way to load onto your trailer?
• What do you NOT need for a load of 'greasy' bars?
• What is the impact of dynamic forces on load securement?
• How many 4x4's are needed for a bulkhead?
• What is a common mistake made during load securement?
• Which type of load does not typically require tarping unless shrink wrapped?
• What is the primary purpose of load securement?
• What should a driver do if they notice cargo shifting during transport?
• What is a common issue leading to claims on loads of insulation?
• What is the maximum height a coil can be off the floor of a trailer?
• What type of chains prevent sheet steel from forward and rear movement?
• Where is the proper place to store V-boards after use?
• After loading or unloading, what is one of the essential checks to perform?
• Which securement method is necessary for maintaining stability in loads like plywood?
• What should be managed to avoid hazards in fall zone 2?
• What should be checked before transporting a load?
• How does cargo shape influence securement methods?
• Is it ever necessary to X-chain a coil when transporting?
• What is an example of a non-standard cargo that requires specialized securement?
• How does uneven weight distribution impact load securement?
• What must be done to ensure the effectiveness of synthetic straps?
• What should be the minimum number of securement points for heavy loads?
• What is the consequence of not using proper securement techniques?
• What is the importance of using a load binder?
• How do you determine the appropriate amount of securement devices for a load?
• Can you double stack 20' steel bars in the center of the trailer?
• What is the primary hazard in fall zone 1?
• Why is it important to avoid over-tightening straps?
• Where may you store your bungees?
• Which of the following is necessary to prevent X-straps from slipping off during securement?
• What is the safest method to close a snap binder?
• Which of the following is a proper practice for securing loose items?
• What is the critical factor in securing rounded cargo?
• When opening a snap binder, where should the cheater bar be placed for leverage?
• Why is it important to know the weight of your cargo?
• What is an important consideration when using straps for securing loads?
• Which regulation governs load securement in the United States?
• Why is securing loose items important in load securement?
• What is an essential factor to consider with heavy cargo?
• According to TMC policy, how should coils be loaded when possible?
• What is a critical driving practice when transporting loads?
• True or False: You must get the straps on insulation as tight as you can.
• According to TMC requirements, what is necessary for each coil being loaded?
• Which of the following is a key hazard when handling securement equipment?
• Why is it necessary to consider weather conditions when securing a load?
• What is the formula for the correct number of coil racks under a coil weighing up to 10,000 lbs?
• True or False: The proper technique for lifting is to keep your back straight.
• Which type of cargo requires diagonal securement?
• True or False: It is advisable to avoid placing a strap and winch above a tire.
• What edge protectors are used for loads of wallboard or insulation?
• What angle should tie-downs ideally form with the horizontal?
• What type of load should always be tarped?
• What is the standard requirement for securing cargo outside vehicle dimensions?
• What is a good practice for securing tall loads?
• Which is the first step in securing a load?
• Which of the following is a guideline for load checking?
• If a coil weighs 40,000 lbs, how many racks are needed?
• In which situation would additional securement devices be necessary?
• Which type of load is most likely to shift during transport?
• When loading coiled rod, what is a crucial step to ensure load stability?
• Why is it important to avoid looking at the bungee while tightening?
• When loading and transporting vinyl siding, what is one important practice to follow?
• What factor is critical in determining the correct securement method?
• Is it acceptable to get hurt on the job?
• Where should you begin during the loading/unloading process?
• What type of footwear is recommended by the TMC safety policy?
• What is the minimum number of chains recommended for a shotgun coil?
• What role does friction play in load securement?
• How does inadequate securement impact road safety?
• Can padding tarps also be used as smoke tarps for plastic pipe?
• Must belly straps be pulled in the opposite direction of top straps?
• Which of the following is NOT a type of load securement device?
• Which of the following is part of the TMC personal protective equipment policy?
• What is the consequence of not adhering to load securement regulations?
• What are the common types of devices used for load securement?
• True or False: On single shotgun coiled rod, you use coil racks and 4x4's.
• True or False: All brick loads must be tarped unless they are shrink wrapped or banded.
• What is the significance of a cargo securement manual?
• How can falling hazards off the trailer be primarily prevented in fall zone 2?
• When is it acceptable to let go of the cheater bar?
• Which type of cargo requires special attention for securement?
• What should be ensured about the deck before securing a load?
• What kind of conditions can make foot stability hazardous in fall zone 1?
• True or False: When picking up a tarp, you should always bend at the waist.
• What is the benefit of using multiple securement methods simultaneously?
• How often do lumber loads require a securement device?
• Which types of loads require an X-strap for securement?
• Which of the following can be used to secure skidded coil?
• What characteristic of a load may dictate the type of securement device used?
• In load securement, what does a proper tie-down ensure?
• What should you consider when loading long, heavy items like pipe?
• What is the minimum number of tie-downs recommended for securing a load?
• What is the difference between a tie-down and a lashing?
• What is a necessary step when strapping shotgun coil rod?
• When securing loads of vinyl siding, what should you avoid doing?
• What is the primary function of universal load racks or bins in transportation?
• What may be a potential cause of falling from cargo in fall zone 3?
• How should loose cargo be dealt with before transport?
• How should loads be secured on an open bed truck?
• What is the purpose of a load chart?
• What must you do when picking up a load of greasy bars?
• How frequently should securement devices be inspected?
• What role does gravity play in load securement?
• What is typically used to secure 4x4's to the dolly legs?
• How often should you check your load when transporting?
• What effect can abrupt stops have on cargo during transport?
• What securement do you use for skidded aluminum coils?
• What role does gravity play in cargo movement?
• When is an anti-slip mat used in load securement?
• What should you do if a load shifts during transport?
• What is the primary purpose of edge protectors in load securement?
• Suicide coiled rods require which method for securement?
• Which statement is true regarding the storage of securement devices?
• What physical inspection should be performed on lashing equipment?
• How are heavy loads typically secured?
• What does not apply to a load of plastic pipe?
• Once a coil reaches how many pounds, it cannot be loaded shotgun without approval?
• What environmental condition could increase risks in fall zone 3?
• What should the maximum angle be for tie-downs to ensure effective load securement?
• What does "sandwiching" a load refer to in load securement?
• What type of edge protector should be used on round greasy bars?
• How can you prevent shifting of loads during transport?
• What is the primary role of edge protectors?
• What is a common mistake made when securing loads?
• True or False: A more efficient way to work is to go as fast as you can.
• What should be done if securement equipment is found to be damaged?
• How does improper loading affect cargo transportation?
• Which factor can lead to reduced effectiveness of load securement?
• Which factors can affect load securement?
• How should coils be placed on the coil racks?
• Is it necessary to ensure no one is on the other side of the trailer when throwing straps?
• Why is it important to regularly inspect securement equipment?
• What is the consequence of not securing the load properly during transport?
• What safety measures should be in place when loading and unloading cargo?
• During loading, what is a recommended practice for safety?
• In what situations is a vehicle with a low center of gravity advantageous for load securement?
• What is required when securing a load of suicide coiled rods?
• What happens to cargo stability if cargo is not secured during transport?
• How frequently should you check your load after the initial check?
• Single shotgun coil rods require:
• What is a common mistake when securing cargo?
• Which hazard is specifically mentioned for fall zone 3?
• What is a necessary action after securing a load but before moving?
• What type of listed loads do you alternate the strap winches?
• What is a key consideration for securing heavy cargo?
• What is the formula for calculating the number of chains needed for a suicide coil?
• What is the proper securement device for building a bulkhead?
• What is the effect of a load that is not properly secured?
• What is commonly used to secure a load of rolled roofing?
• What is an optimal tie-down angle for securing cargo?
• What is the function of a strap ratchet?
• Is it advisable to use the same type of securement device for all cargo types?
• True or False: You never have to tarp coil rod.
• What is the required number of feet for metallic loads to have a securement device?
• Why is it essential to distribute cargo evenly within a trailer?
• What are cargo nets primarily used for?
• What are the risks of using worn or damaged securement equipment?
• Which practice is important to ensure safety when using X-straps?
• True or False: Load shifts and falling freight can occur during the loading/unloading process?
• What is the role of corner protectors in load securement?
• Why is it important to secure loads correctly?
• How can temperature affect the performance of securement devices?